Drum Clamp

Drum Clamp - Forklifts are designed to handle moving, lifting and storing pallets. For companies that handle products inside drums, you will need to utilize an attachment to store, move and lift them. There are various drum forklift accessories that you can get for all of your drum lifting requirements. These attachments are specifically designed to be able to handle drum containers - therefore there is no risk of damage to the item or drum container whenever they are lifted, stored or moved.

Drum Positioner And Grab
The drum positioner is accessible in three or four tine models. They are utilized for the unloading and loading of drums off vehicles, drum stands and racks. This accessory is totally automatic, thus allowing the operator to operate all from the comfort of the forklift seat. Able to move large and extra large plastic drums, steel, its capacity is 210 liters. This particular accessory is used for drum pyramid stacking.

The drum grab is fork mounted and is designed with the sole objective of dealing with steel drums which have rolling hoops. Even if the purpose for the design was to handle steel drums with rolling hoops, the drum grab can accommodate the moving of extra large and large plastic drums. Drum capacity maximum is 210 liters for steel drums with rolling hoops and 220 liters for plastic drums.

The Rotator
The drum rotator is another forklift attachment which mounts onto the blades themselves. Their purpose is to be able to pick up the drum and turn it upside down. The drum is clamped into the drum rotator using a clamp that fits around the middle of the drum. The rotation is executed by either a continuous loop chain or a crank handle. The crank handle is used for operations that happen below shoulder level. For operations which must happen higher than shoulder level, the continual circle chain will be utilized.

The drum tines are simple fork or carriage mounted attachments. They are meant for stacking and unstacking 210-liter steel drums. Stacking involves nothing elaborate, merely simple horizontal positioning of the drums. The carriage-mounted accessories reduce the load center of the drums.

Automatic Tongs
Drum tongs are obtainable in automatic and semi-automatic versions. They are utilized in the tight head or open topped steel drum styles. The drum tongs could be attached in a few ways to the lift truck. One way is to connect them underneath a fork-mounted hook. One more way is to attach them to a fork-mounted jib or a carriage mounted jib. Either the semi automatic and the automatic have a drum capacity of 210 liters. With the automatic, there is no need for the individual operating it to ever leave the seat of the forklift.

Rim Grip Handler
When drums require storage space with limited area available, the Rim Grip Drum Handler is the perfect choice in drum forklift attachments. This accessory will work for either the two hundred ten liter drums along with one hundred twenty liter drums. The Rim Grip Handler operates by using steel jaws in order to grab the rim of the drum. It picks the drum up and sets it down without needing any room between all the drums. The standard model in the business is a zinc-plated handler, even though, this particular accessory is obtainable in stainless steel for the food and drink industry.

Click to Download the pdf

Forklift Parts

Straight Boom Lift Part

Straight Boom Lift Parts - Boom lifts are also known as aerial work platforms. They could include a platform or bucket which is connected to the end of a hydraulic lifting system. This kind of aerial work platform is usually found mounted on a flat-back pickup van, also called a "Self Drive." Boom lifts are likewise accessible on a self-moving...

More

---

Controllers for Forklift

Forklift Controller - Lift trucks are obtainable in various load capacities and a variety of units. Most lift trucks in a regular warehouse setting have load capacities between 1-5 tons. Bigger scale models are used for heavier loads, like loading shipping containers, may have up to 50 tons lift capacity. The operator could make use of a control in order...

More

---

Mast Rollers

Mast Rollers - The mast of the lift truck is an integral part of the forklift's frame. These lift truck vehicles are huge industrial machines that help companies pick up a transfer materials and goods. The vertical assembly responsible for raising or lowering a load is called the mast. A lift truck mast consists of interlocking rails that provide lateral...

More

---

Attachments for Scissor Lifts

Scissor Lift Attachments - The scissor lift, often acknowledged as a table lift, is an mechanized lift that has been adapted for usage within wholesale and retail settings. Mechanized lifts have been utilized for decades in the manufacturing and production industries to efficiently raise and lower people, resources and gear. The scissor lift is a platform with wheels that operates...

More

---

Lull Telehandler Part

Lull Telehandler Parts - Telehandlers by Lull have been supplying load placement precision since 1959. The Lull telehandler can help make the job faster and easier, whether the job requires landing loads on scaffoldings, transferring loads or positioning heavy steel. These units are available together with the patented Stabil-Trak stability system so as to ensure operator confidence. The Lull horizontal...

More

---

Throttle Body for Forklifts

Forklift Throttle Body - Where fuel injected engines are concerned, the throttle body is the part of the air intake system that regulates the amount of air that flows into the motor. This mechanism works in response to driver accelerator pedal input in the main. Usually, the throttle body is placed between the intake manifold and the air filter box....

More

---

Parts for Telehandlers

Telehandler Parts - The telescopic handler or telehandler is a frequently utilized equipment in agricultural and industrial applications. This machine is the same in appearance to a forklift and also functions in a similar way, though telehandlers are much more like a crane than lift truck. It has a telescopic boom that could lengthen upward and forwards from the motor...

More

---

Fork Mounted Work Platforms

Fork Mounted Work Platform - For the producer to follow requirements, there are specific requirements outlining the standards of forklift and work platform safety. Work platforms could be custom made so long as it satisfies all the design criteria according to the safety requirements. These custom-made made platforms ought to be certified by a licensed engineer to maintain they have...

More

---