Mast Rollers - The mast of the lift truck is an integral part of the forklift's frame. These lift truck vehicles are huge industrial machines that help companies pick up a transfer materials and goods.
The vertical assembly responsible for raising or lowering a load is called the mast. A lift truck mast consists of interlocking rails that provide lateral support. These rails are guided by rollers or brushings.
The masts on lift trucks make use of metal plates to be able to transport materials and are driven by hydraulic systems. Hydraulics is defined by the transmission of power which uses pressurized fluid, which in this case is oil. Hydraulic cylinders which link directly to the forklift engine are responsible for driving the mast, causing it to tilt, lower or lift cargo. The pressurized oil drives the cylinder piston to move in a linear motion, or in strokes. The mast is normally operated by way of a lever inside the cab or situated in the section of the forklift which houses the forklift control components and the driver.
A swing mast defines a lift truck truck with a mast which can revolve in a ninety degree angle in one direction. This design allows the swing mast to operate in aisles which are less than 6 feet wide.
Click to Download the pdf
Forklift Parts
Straight Boom Lift Part
Straight Boom Lift Parts - Boom lifts are also known as aerial work platforms. They could include a platform or bucket which is connected to the end of a hydraulic lifting system. This kind of aerial work platform is usually found mounted on a flat-back pickup van, also called a "Self Drive." Boom lifts are likewise accessible on a self-moving...
More
Controllers for Forklift
Forklift Controller - Lift trucks are obtainable in various load capacities and a variety of units. Most lift trucks in a regular warehouse setting have load capacities between 1-5 tons. Bigger scale models are used for heavier loads, like loading shipping containers, may have up to 50 tons lift capacity.
The operator could make use of a control in order...
More
Attachments for Scissor Lifts
Scissor Lift Attachments - The scissor lift, often acknowledged as a table lift, is an mechanized lift that has been adapted for usage within wholesale and retail settings. Mechanized lifts have been utilized for decades in the manufacturing and production industries to efficiently raise and lower people, resources and gear. The scissor lift is a platform with wheels that operates...
More
Lull Telehandler Part
Lull Telehandler Parts - Telehandlers by Lull have been supplying load placement precision since 1959. The Lull telehandler can help make the job faster and easier, whether the job requires landing loads on scaffoldings, transferring loads or positioning heavy steel. These units are available together with the patented Stabil-Trak stability system so as to ensure operator confidence.
The Lull horizontal...
More
Throttle Body for Forklifts
Forklift Throttle Body - Where fuel injected engines are concerned, the throttle body is the part of the air intake system that regulates the amount of air that flows into the motor. This mechanism works in response to driver accelerator pedal input in the main. Usually, the throttle body is placed between the intake manifold and the air filter box....
More
Parts for Telehandlers
Telehandler Parts - The telescopic handler or telehandler is a frequently utilized equipment in agricultural and industrial applications. This machine is the same in appearance to a forklift and also functions in a similar way, though telehandlers are much more like a crane than lift truck. It has a telescopic boom that could lengthen upward and forwards from the motor...
More
Fork Mounted Work Platforms
Fork Mounted Work Platform - For the producer to follow requirements, there are specific requirements outlining the standards of forklift and work platform safety. Work platforms could be custom made so long as it satisfies all the design criteria according to the safety requirements. These custom-made made platforms ought to be certified by a licensed engineer to maintain they have...
More
Crown Forklift Parts
Crown Forklift Parts - The Crown company was founded in 1945 by two brothers, Allen A. Dicke and the late Carl H. Dicke. Carl's son and Chairman Emeritus, James F. Dicke, joined the family business later that same year. Presently, his son, James F. Dicke II, is Chairman and CEO. James F. Dicke III, serves as the company President these...
More
